Currency Displayed in
Below are the available bulk discount rates for each individual item when you purchase a certain amount
● YUMINASHI B-TYPE INJECTOR JOINT (FOR DOWNDRAFT THROTTLE BODY)
● This B-Type injector joint is mentioned to be installed on the Yuminashi Type-1, Type-2 and Type-3 manifolds, and on the downdraft throttle body model.
The downdraft throttle body is the throttle body with the large TPS sensor block , and with the injector installed in the throttle body.
These downdraft throttle bodies with standard A-Type injector where used by Honda on these models:
● THESE B-TYPE INJECTOR JOINTS CAN ALSO BE INSTALLED ON DENSO INJECTOR THROTTLE BODIES!
● With these B-Type injector joints you can transform a 37mm CRF250F, 39mm CBR250R or CBR300R Denso throttle body (mentioned for a Denso injector) in to a B-Type injector throttle body.
If you install this B-Type injector joint on a Denso throttle body, then this would allow you to install the CRF250F, CBR250R and CBR300R throttle body on these bikes:
● Once this B-Type injector joint is installed on the throttle body you can install any B-type injector in your throttle body.
Keep in mind that you need to use the A-Type to B-Type wire loom to connect the B-Type injector to your stock wire harness.
If you have the Yuminashi 31mm throttle body with A-type injector installed on a bike which comes original/stock with a B-type injector, then you need to install only this B-Type injector joint to change from A-Type injector to B-Type injector, you don't need to use the wire loom then...
SMART SHOPPER TIP:
※ BUYING MORE THEN 1 PIECE CUT THE TRANSPORT PRICE, AND YOU RECEIVE A 10% DISCOUNT ON TOP OF IT!
※ B2B:
All prices are in XPF