Currency Displayed in
Below are the available bulk discount rates for each individual item when you purchase a certain amount
● 6-BOLT BILLET CLUTCH UPGRADE SET (Z125 MONKEY - MSX/GROM125 OG & SF) (22350-KPG-T06S)
● This YUMINASHI 6-Bolt Billet Clutch Upgrade Set is a complete set to convert your stock 3 bolt clutch into a high end 6 bolt upgrade.
● The clutch pressure plate in this set is the genuine Honda 22350-KPG-T00 clutch pressure plate which has been machined to accept 6 bolts to better distribute clutch pressures, and this will greatly assist during installation of heavy duty springs, and will prevent breakage due to lack of support.
● This clutch upgrade comes complete with 6 new genuine Honda bolts 90050-KPH-900 (LINK) in the package so that you can be ensured you have the correct bolt quality with the correct tensile strength for the clutch, and without the need to reuse the bolts from your clutch.
※ Keep in mind that swapping the lower pressure plate does require a special socket for removing the oil spinner and clutch assembly.
● The YUMINASHI 6-Bolt Clutch Lifter Plate in the set is precision machined based on Japanese standards from Billet 6061-T6 aluminium Anodised black.
● A lot of attention has been given to the support at the back side of the plate, because this is something which is easily overlooked. The stock OEM clutch lifter plate support the clutch springs only with an area of about 35% to sit on, and the entire area below in the middle of the spring is empty, and doesn't support the spring.
● YUMINASHI made sure that the entire spring is 100% supported on a perfectly flat area, which is certainly important if you want to install and support stronger clutch springs.
By doing so YUMINASHI is hitting 2 birds with 1 stone with this, because it makes the plate stronger again and you won't have the issue anymore from the springs jumping to the side at the moment you are tightening the clutch lifter plate which is a very common and annoying issue.
● The CNC YUMINASHI Billet 6060-T6 Alloy Clutch Lifter Plate is a direct replacement for the cast aluminium unit, and has been designed with the 6 bolts to handle more than 80% stronger clutch springs which should be perfect to serve all types of stunt & high performance riders.
※ If you are also looking for stronger springs, then we have them available with this LINK.
※ If you are a novice mechanic, keep in mind that you will need to distribute the load on the clutch lift plate when you tighten the 6 bolts.
A typical beginner mistake is to install 1 of the 6 bolts, and to try then to tighten each bolt one by one.
If you would do this, then this can damage the plate depending on the strength of the springs you are using.
So please avoid this, and spread the load evenly on the clutch lifter plate...
※ The RRP (Recommend Retail Price) we show above is based on the retail price in the U.S., this part retails with comparable materials and grade of machining quality between $95.00 and $135.00 and could be a interesting asset for you as business owner to consider supplying to your customers...
● THIS 6-BOLT BILLET CLUTCH UPGRADE SET IS THE CORRECT SET TO BE INSTALLED ON:
HONDA:
SMART SHOPPER TIP:
※ BUYING MORE THAN 1 PIECE CUT THE TRANSPORT PRICE, AND YOU RECEIVE A 10% DISCOUNT ON TOP OF IT!
※ B2B:
All prices are in THB