VISION 110 ESP | K44 (JAN 2017 - DEC 2020)

YUMINASHI

04322-02P-002S | FEMALE INJECTOR CONNECTOR SET WITH TERMINALS & SEALS (FOR B-TYPE INJECTOR)

● FEMALE INJECTOR CONNECTOR SET WITH TERMINALS & SEALS (TOP RIB)    (KEIHIN B-TYPE INJECTOR CONNECTO

YUMINASHI

04322-03P-002S | CONNECTOR SET, FEMALE, 3-PIN, KEIHIN THROTTLE BODY

● 3-PIN FEMALE CONNECTOR SET FOR 3-PIN KEIHIN THROTTLE POSITION SENSOR (04322-03P-002S)

HONDA

06430-KWN-900 / 06430-KZL-930 | SHOE SET, BRAKE (JB)

● GENUINE HONDA SHOE

YUMINASHI

07GMA-KS40100R | WRENCH, SOCKET 39x41, CLUTCH (FOR TORQUE SPRING NUT, SCOOTER)

● YUMINASHI 07GMA-KS40100R | WRENCH, SOCKET 39x41, CLUTCH (FOR TORQUE SPRING NUT, SCOO

YUMINASHI

1.2 - 2MM DRILL, CRANKCASE, OIL PUMP CHANNEL (1 PIECE)

● YUMINASHI 1.2MM - 2MM DRILL, CRANKCASE, OIL PUMP CHANNEL ●

YUMINASHI

10 GR. ROLLER WEIGHT SET (Ø18x14) (6PCS/SET)

● 10 GR. ROLLER WEIGHT SET Φ18x14 (6PCS/SET)   (Φ18x14 FOR

YUMINASHI

100L / 13 PIN FORGED CONROD SET (NICE110 / TRX90 / YX140 / YX149)

● 100L FORGED CONROD SET / 13-PIN (13 X 30.1 X 100L) (Ø25.1MM X 39MM CRANKPIN)

HONDA

100L/13-PIN BIG-END SET HONDA (13 X 30.1 X 100L)

 ● 100L/13-PIN BIG-END SET HONDA (13 X 30.1 X 100L) (06381-KFL-850)

YUMINASHI

12 GR. ROLLER WEIGHT SET (Ø18x14) (6PCS/SET)

● 12 GR. ROLLER WEIGHT SET Φ18x14 (6PCS/SET)   (Φ18x14 FOR

KEIHIN / YUMINASHI

120CC/MIN B-TYPE INJECTOR (6-HOLES) (F-INJECTOR)

● GENUINE KEIHIN 120CC/MIN B-TYPE (6-HOLES) A.K.A. "STUNT BIKE" F-INJECTOR <

YUMINASHI PERFORMANCE SERIES

120CC/MIN B-TYPE INJECTOR (6-HOLES) (FC-INJECTOR)

● GENUINE YUMINASHI PERFORMANCE SERIES 120CC/MIN B-TYPE (6-HOLES) FC-INJECTOR

YUMINASHI

120CC/MIN B-TYPE INJECTOR (8-HOLES) (VXT-INJECTOR) | 16450-B08-VXT

● GENUINE KEIHIN 120CC/MIN B-TYPE (8-HOLES) VXT-INJECTOR

HONDA

12191-K44-V80 | GASKET, CYLINDER

● GENUINE HONDA GASKET, CYLINDER (12191-K44-V80)

YUMINASHI

12204-000-450 | 4.5MM VALVE GUIDE FOR 4.5MM VALVES (OD 10.05MM x L35.6MM)

● 4.5MM VALVE GUIDE FOR 4.5MM VALVES (OD 10.05MM x L35.6MM)

YUMINASHI

12209-000-450 | 4.5MM SEAL, VALVE STEM (4.5 X 10 X 8)

● YUMINASHI 4.5MM SEAL, VALVE STEM (4.5 X 10 X 8) (12209-000-450) ● High

HONDA

12209-GB4-681 / 12209-GB4-682 | VALVE STEM (GENUINE HONDA)

● GENUINE HONDA SEAL VALVE STEM (12209-GB4-681 /

YUMINASHI PERFORMANCE SERIES

127CC/MIN B-TYPE INJECTOR (6-HOLES) (FXC-INJECTOR)

● GENUINE YUMINASHI PERFORMANCE SERIES 127CC/MIN B-TYPE (6-HOLES) FC-INJECTOR&nbs

YUMINASHI

13009-000-900 | MANUAL PISTON RING FILER (PISTON RING GAP FILER)

● YUMINASHI MANUAL PISTON RING FILER (PISTON RING GAP FILER) (13009-000-900

YUMINASHI

13011-000-540 | 54MM YUMINASHI PISTON RING SET (HARD CHROMINUM PLATING)

● 54MM YUMINASHI PISTON RING SET (0.8X0.8X1.5) (HARD CHROMINUM

YUMINASHI

13011-000-560 | 56MM YUMINASHI PISTON RING SET (HARD CHROMIUM PLATING)

● 56MM YUMINASHI PISTON RING SET (0.8X0.8X1.5) (HARD CHROMINUM P

YUMINASHI

13011-000-5625 | 56.25MM YUMINASHI PISTON RING SET (HARD CHROMIUM PLATING)

● 56.25MM YUMINASHI PISTON RING SET (0.8X0.8X1.9) 

YUMINASHI

13011-000-565 | 56.5MM YUMINASHI PISTON RING SET (HARD CHROMIUM PLATING)

● 56.5MM YUMINASHI PISTON RING SET (0.8X0.8X1.9) 

YUMINASHI

13011-000-5675 | 56.75MM YUMINASHI PISTON RING SET (HARD CHROMIUM PLATING)

     SMART SHOPPER TIP:      &nbs

YUMINASHI

13011-000-570 | 57MM YUMINASHI PISTON RING SET (HARD CHROMIUM PLATING)

● 57MM YUMINASHI PISTON RING SET (0.8X0.8X1.5) 

YUMINASHI

13100-013-500B | 50MM 13-PIN PISTON, TUNER EDITION (SEMI-DOME)

● 50MM / 13-PIN, TUNER EDITION PISTON (SEMI-DOME) (13100-013-500B)

YUMINASHI

13100-013-600 | 60MM TUNER EDITION PISTON SET (13MM PIN)

● 60MM TUNER EDITION PISTON SET (13MM PIN) ● 

HONDA

13115-GN5-910 | CLIP, PISTON PIN (13MM)

● GENUINE HONDA CLIP, PISTON PIN (13MM) (13115-GN5-910)

YUMINASHI

13381-KFL-100S | Ø25.1MM CRANK PIN / BEARING REPLACEMENT SET (C100 - NICE110 - WAVE100 - EX5 - YX149)

● Ø25.1 CRANK PIN / BEARING REPLACEMENT SET (13381-KFL-100S)

YUMINASHI

13381-KPH-200 | 2MM OFFSET STROKER PIN Ø25.1MM X L39MM

● YUMINASHI 2MM OFFSET STROKER PIN Ø25.1MM X L39MM <

YUMINASHI

13381-KPH-300 | 3MM OFFSET STROKER PIN Ø25.1MM X L39MM

● YUMINASHI 3MM OFFSET STROKER PIN Ø25.1MM X L39MM 

YUMINASHI PERFORMANCE SERIES

134CC/MIN B-TYPE INJECTOR (6-HOLES) (GC-INJECTOR)

● GENUINE YUMINASHI PERFORMANCE SERIES 134CC/MIN B-TYPE (6-HOLES) GC-INJECTOR&nbs

KEIHIN / YUMINASHI

140CC/MIN B-TYPE INJECTOR (6-HOLES) (PCX150 H-INJECTOR) | 16450-B06-00H

● GENUINE KEIHIN 140CC B-TYPE (6-HOLES) "HONDA PCX150" H-FUEL

YUMINASHI PERFORMANCE SERIES

140CC/MIN B-TYPE INJECTOR (8-HOLES) (VYT C-INJECTOR)

● GENUINE YUMINASHI PERFORMANCE SERIES 140CC/MIN B-TYPE (8-HOLES) VYT C-INJECTOR&

KEIHIN / YUMINASHI

140CC/MIN B-TYPE INJECTOR (8-HOLES) (VYT-INJECTOR) | 16450-B08-VYT

● YUMINASHI 140CC/MIN B-TYPE (8-HOLES) VYT FUEL INJECTOR 

YUMINASHI

14401-2X3-092 | 92L (2X3) CAM CHAIN (DID), SILENT TYPE / D.I.D. JAPAN

● YUMINASHI 2 X 3 X 92L CAM CHAIN (DID), SILENT TYPE (14401-2X3-092)&nb

YUMINASHI

14401-2X3-094 | 94L (2X3) CAM CHAIN, SILENT TYPE (CB125F / CRF150L / GLR125 / DAYTONA ANIMA)

● YUMINASHI 94L (2X3) CAM CHA

YUMINASHI

14401-2X3-096 | 96L (2X3) CAM CHAIN, SILENT TYPE (FOR LONG STROKE CRANKSHAFT)

● GENUINE HONDA 96L (2X3) CAM CHAIN (DAIDO), SILENT TYPE 

YUMINASHI

14401-2X3-098 | 98L (2X3) CAM CHAIN, (FOR LONG STROKE CRANKSHAFT)

● GENUINE HONDA 98L (2X3) CAM CHAIN (DAIDO), SILENT TYPE 

YUMINASHI

14401-2X3-099 | 99L (2X3) CAM CHAIN, (FOR LONG STROKE CRANKSHAFT)

● YUMINASHI 99L CAM CHAIN, (FOR LONG STROKE CRANKSHAFT) (14401-2X3-099)

YUMINASHI

14401-2X3-100 | 100L (2X3) CAM CHAIN, (FOR LONG STROKE CRANKSHAFT)

         

YUMINASHI

14401-2X3-101 | 101L (2X3) CAM CHAIN, (FOR LONG STROKE CRANKSHAFT)

         

YUMINASHI

14401-2X3-102 | 102L (2X3) CAM CHAIN, (FOR LONG STROKE CRANKSHAFT)

         

YUMINASHI

14570-K26-000 | INJECTOR HOLE SEALING BUTTON (BLACK)

● INJECTOR HOLE SEALING BUTTON ● This injector hole sealing button can b

HONDA

14711-KVY-900 | VALVE, IN (NAVI110 / BENLY 110 / DIO110i / VISION 110...)

● GENUINE HONDA VALVE, IN (14711-KVY-900)● This inta

HONDA

14781-MA6-000 | COTTER, VALVE (5MM)

● GENUINE OEM HONDA COTTER, VALVE (14781-MA6-000)

YUMINASHI PERFORMANCE SERIES

155CC/MIN B-TYPE INJECTOR (8-HOLES) (5YT C-INJECTOR)

● GENUINE YUMINASHI PERFORMANCE SERIES 155CC/MIN B-TYPE (8-HOLES) 5YT C-INJECTOR&

YUMINASHI

16166-0M6-311S | INTAKE MANIFOLD NOZZLE & COMBINED DRILL & TAP SET (M6 / Ø6MM X 31.1MM)

● INTAKE MANIFOLD NOZZLE & COMBINED DRILL & TAP SET (M6 / Ø6MM X 31.1MM)

YUMINASHI

16211-KZY-031 | 31MM/35MM INSULATOR REPLACEMENT SET

● 31MM/35MM INSULATOR REPLACEMENT SET (FOR 32MM / 32MM / 35MM THROTTLE BODY)

YUMINASHI

16215-000-300 | 3MM VACUUM CAP (1 PIECE / BLACK) (FOR MANIFOLD, CARBURETOR & THROTTLE BODY USE)

● YUMINASHI 3MM VACUUM CAP (1PIECE / BLACK) (FOR MANI

YUMINASHI

16241-B10-65B | 75CM AIR BREATHER SET, STAINLESS STEEL (10X5.4MM), BLACK PU HOSE (10X6.5X500MM)

           

KEIHIN

16400-k26-921 | 24MM KEIHIN THROTTLE BODY & SENSOR ASSY (GROM / MSX125 / CRF110F)

● 24MM GENUINE KEIHIN JAPAN THROTTLE BODY & SENSOR ASSY (16400-K26-921 / 16400-K26-B11

YUMINASHI

16422-000-B00 | B-TYPE INJECTOR JOINT

● YUMINASHI B-TYPE INJECTOR JOINT (FOR DOWNDRAFT THROTTLE BODY) ●

HONDA

16472-KPH-701 / 16472-KPC-D50 | RING, SEAL

● GENUINE HONDA RING, SEAL (16472-KPH-701  / 16472-KPC-D50)

YUMINASHI PERFORMANCE SERIES

165CC/MIN B-TYPE INJECTOR (8-HOLES) (5ED C-INJECTOR)

● GENUINE YUMINASHI PERFORMANCE SERIES 165CC/MIN B-TYPE (8-HOLES) 5ED C-INJECTOR&

YUMINASHI

170CC/MIN B-TYPE INJECTOR (8-HOLES) (5ED-INJECTOR) | 16450-B08-5ED

● 170CC B-TYPE (8-HOLES) 5ED-INJECTOR●  If

YUMINASHI

17220-000-K35B | 35MM DARK CONE PERFORMANCE SERIES, NON-WOVEN AIR FILTER

● GENUINE YUMINASHI 35MM DARK CONE PERFORMANCE SERIES, NON-WOVEN AIR FILTER (WASHABLE)

YUMINASHI

17220-000-K51B | 51MM DARK CONE PERFORMANCE SERIES, NON-WOVEN AIR FILTER

● GENUINE YUMINASHI 51MM DARK CONE PERFORMANCE SERIES, NON-WOVEN AIR FILTER (WASHABLE)

YUMINASHI

17220-000-O51B | 51MM DARK OVAL PERFORMANCE SERIES, NON-WOVEN AIR FILTER

● GENUINE YUMINASHI 51MM DARK OVAL PERFORMANCE SERIES, NON-WOVEN AIR FILTER (WASHABLE)

YUMINASHI

17220-045-F45B | 45MM, 45° ANGLE DOUBLE LAYER FOAM / ABS AIR FILTER

● 45MM,  45° ANGLE DOUBLE LAYER FOAM / ABS AIR FILTER  スーパ

YUMINASHI

17528-KZY-000 | HIGH FLOW FUEL LINE HOSE (FOR BIG BORE 110 / 125 / 150 & 160CC ENGINES)

● HIGH FLOW FUEL LINE HOSE (FOR BIG BORE 110CC / 125CC / 150cCC & 160CC ENGINES)

YUMINASHI

17530-630-800S | STRAIGHT (2PCS/SET) FUEL HOSE CONNECTOR SET (FOR 6.3MM O.D. INJECTOR JOINT)

● YUMINASHI STRAIGHT (2PCS) FUEL HOSE CONNECTOR SET (FOR 6.3MM O.D. INJECTOR JOINT) (17530-630-8

YUMINASHI

17530-630-890S | 90° (2PCS) FUEL HOSE CONNECTOR SET (FOR 6.3MM O.D. INJECTOR JOINT)

● YUMINASHI 90° (2PCS) FUEL HOSE CONNECTOR SET (FOR 6.3MM O.D. INJECTOR JOINT) (17530-6

YUMINASHI

17530-630-8MXS | STRAIGHT & 90° (2PCS/SET) FUEL HOSE CONNECTOR SET (FOR 6.3MM O.D. INJECTOR JOINT)

● YUMINASHI STRAIGHT & 90° (2PCS/SET) FUEL HOSE CONNECTOR SET (FOR 6.3MM O.D. INJECTOR J

HONDA

18291-KVB-900 | GASKET, EXHAUST (Ø29.9x22.8MM) (100CC / 110CC / 125CC ENGINES)

● GENUINE HONDA GASKET, EXHAUST (Ø29.9x22.8MM) (18291-KVB-900)<

YUMINASHI PERFORMANCE SERIES

183CC/MIN B-TYPE INJECTOR (12-HOLES) (VED C-INJECTOR)

● GENUINE YUMINASHI PERFORMANCE SERIES 183CC/MIN B-TYPE (12-HOLES) VED C-INJECTOR

YUMINASHI PERFORMANCE SERIES

197CC/MIN B-TYPE INJECTOR (12-HOLES) (IX1 C-INJECTOR)

● GENUINE YUMINASHI PERFORMANCE SERIES 197CC/MIN B-TYPE (12-HOLES) IX1 C-INJECTOR

YUMINASHI PERFORMANCE SERIES

211CC/MIN B-TYPE INJECTOR (12-HOLES) (KOS C-INJECTOR)

● GENUINE YUMINASHI PERFORMANCE SERIES 211CC/MIN B-TYPE (12-HOLES) KOS C-INJECTOR

YUMINASHI PERFORMANCE SERIES

227CC/MIN B-TYPE INJECTOR (12-HOLES) (4VA C-INJECTOR)

● GENUINE YUMINASHI PERFORMANCE SERIES227CC/MIN B-TYPE (12-HOLES) 4VA C-INJECTOR

HONDA

22804-148-000 | RUBBER, CLUTCH DAMPER

● GENUINE HONDA RUBBER, CLUTCH DAMPER (PCX150 - ADV150 - CLICK/VARIO150) (22804-148-000)

YUMINASHI

23238-508-582S | THROTTLE RESPONSE ENHANCER WITH SPRINGS SET (50.8MM X 58.2MM)

● YUMINASHI THROTTLE RESPONSE ENHANCER WITH SPRINGS SET (50.8MM X 58.2MM) (23238-508-5

KEIHIN / HONDA

235CC/MIN B-TYPE INJECTOR (10-HOLES) (NNJ-INJECTOR) | 16450-B10-NNJ

● 235CC B-TYPE INJECTOR (10-HOLES) (NNJ-INJECTOR)

YUMINASHI PERFORMANCE SERIES

244CC/MIN B-TYPE INJECTOR (12-HOLES) (4VB C-INJECTOR)

● GENUINE YUMINASHI PERFORMANCE SERIES244CC/MIN B-TYPE (12-HOLES) 4VB C-INJECTOR

YUMINASHI

25MM - 32MM THROTTLE BODY BUTTERFLY VALVE (FOR KEIHIN)

● YUMINASHI 25MM - 32MM THROTTLE BODY BUTTERFLY VALVE    (FOR KEIHIN THROTTLE BOD

YUMINASHI PERFORMANCE SERIES

263CC/MIN B-TYPE INJECTOR (12-HOLES) (4VC C-INJECTOR)

● GENUINE YUMINASHI PERFORMANCE SERIES263CC/MIN B-TYPE (12-HOLES) 4VC C-INJECTOR

YUMINASHI PERFORMANCE SERIES

287CC/MIN B-TYPE INJECTOR (12-HOLES) (5UJ C-INJECTOR)

● GENUINE YUMINASHI PERFORMANCE SERIES287CC/MIN B-TYPE (12-HOLES) 5UJ C-INJECTOR

YUMINASHI

28MM THROTTLE BODY (CLICK125 - MSX/GROM125 - Z125 MONKEY - CRF110F...)

● Ø28MM 2021-TYPE LARGE STYLE YUMINASHI THROTTLE BODY (MSX/GROM125 - Z125 MON

KEIHIN / YUMINASHI

28MM YUMINASHI / KEIHIN THROTTLE BODY UPGRADE SET (KWW/110i-TYPE)

● 28MM YUMINASHI / KEIHIN THROTTLE BODY UPGRADE SET (KWW/110i-TYPE)

KEIHIN / YUMINASHI

3-PIN KEIHIN THROTTLE POSITION SENSOR (MSX125 / MONKEY125 / ZOOMER-X / ETC... )

● 3-PIN KEIHIN THROTTLE POSITION SENSOR (16060-K26-900)

YUMINASHI PERFORMANCE SERIES

305CC/MIN B-TYPE INJECTOR (12-HOLES) (FUJ C-INJECTOR)

● GENUINE YUMINASHI PERFORMANCE SERIES305CC/MIN B-TYPE (12-HOLES) FUJ C-INJECTOR

YUMINASHI

30MM THROTTLE BODY (CLICK125 - MSX/GROM125 - Z125 MONKEY - CRF110F...)

● Ø30MM 2021-TYPE LARGE STYLE YUMINASHI THROTTLE BODY (MSX/GROM125 - Z125 MON

YUMINASHI

32101-00B-00D | B-TYPE TO DENSO INJECTOR WIRE LOOM

● B-TYPE TO DENSO INJECTOR WIRE LOOM ● Plug & Play B-type t

YUMINASHI

32MM THROTTLE BODY | 150-TYPE (CLICK125 - MSX/GROM125 - Z125 MONKEY - CRF110F...)

● Ø32MM | 150-TYPE YUMINASHI THROTTLE BODY (MSX/GROM125 - Z125 MONK

YUMINASHI PERFORMANCE SERIES

332CC/MIN B-TYPE INJECTOR (12-HOLES) (GUJ C-INJECTOR)

● GENUINE YUMINASHI PERFORMANCE SERIES332CC/MIN B-TYPE (12-HOLES) GUJ C-INJECTOR

YUMINASHI

35MM THROTTLE BODY (MSX/GROM - AIR BLADE - MONKEY 125)

● 35MM THROTTLE BODY SET    

YUMINASHI

36532-G30-0300 | X-SERIES WIDEBAND UEGO AFR/LAMBDA/O2 GAUGE KIT (FUEL INJECTION & CARBURETOR ENGINES)

● YUMINASHI X-SERIES WIDEBAND UEGO AFR/LAMBDA/O2 GAUGE KIT (FOR FUEL INJECTION & CARBURETOR

HONDA

37750-KPH-701 | SENSOR ASSY., THERMOSTAT OIL (GENUINE HONDA)

● GENUINE HONDA SENSOR ASSY., THERMOSTAT OIL (37750-KPH-701)

YUMINASHI

37MM THROTTLE BODY SET FOR (CRF110F- MSX/GROM125 - CT HUNTER CUB)

● YUMINASHI SUPER BORE 37MM THROTTLE BODY SET (16400-K26-037)

YUMINASHI

43514-014-0BL | AN6 BLACK OIL COOLER HOSE CLAMP (14MM - 9/16")

● AN6 BLACK OIL COOLER HOSE CLAMP (14MM - 9/16") (43514-014-0BL)

YUMINASHI

43514-014-0BU | AN6 BLUE OIL COOLER HOSE CLAMP (14MM - 9/16")

● AN6 BLUE OIL COOLER HOSE CLAMP (14MM - 9/16") (43514-014-0BU) ●&n

YUMINASHI

43514-014-0RD | AN6 RED OIL COOLER HOSE CLAMP (14MM - 9/16")

● AN6 RED OIL COOLER HOSE CLAMP (14MM - 9/16") (43514-014-0RD) ●&nb

YUMINASHI

43514-014-0SV | AN6 SILVER OIL COOLER HOSE CLAMP (14MM - 9/16")

● AN6 SILVER OIL COOLER HOSE CLAMP (14MM - 9/16") (43514-014-0SV) ●

YUMINASHI

43514-014-0TI | AN6 TITANIUM OIL COOLER HOSE CLAMP (14MM - 9/16")

● AN6 TITANUIM OIL COOLER HOSE CLAMP (14MM - 9/16") (43514-014-0TI)

YUMINASHI

43514-014-GLD | AN6 GOLD OIL COOLER HOSE CLAMP (14MM - 9/16")

● AN6 GOLD OIL COOLER HOSE CLAMP (14MM - 9/16") (43514-014-GLD) ●&n

HONDA

46401-TM8-A01 | EXTERNAL MAP SENSOR (SENSOR A, (MAP) MASTER POWER PRESSURE)

● GENUINE HONDA EXTERNAL SENSOR A, (MAP) MASTER POWER PRESSURE (46401-TM8-A01)● This MAP sensor with

YUMINASHI

52MM (0.6MM) COPPER HEAD GASKET (ZOOMER-X / SCOOPY-i / DIO 110 / VISION 110 / MOOVE)

● 52MM (0.6MM) COPPER HEAD GASKET (ZOOMER-X / SCOOPY-i / DIO 110 / VISION 1

YUMINASHI

53MM (0.6MM) COPPER HEAD GASKET(ZOOMER-X / SCOOPY-i / DIO 110 / VISION 110 / MOOVE)

● 53MM (0.6MM) COPPER HEAD GASKET(ZOOMER-X / SCOOPY-i / DIO 110 / VISION 11

YUMINASHI

54MM (0.6MM) COPPER HEAD GASKET(ZOOMER-X / SCOOPY-i / DIO 110 / VISION 110 / MOOVE)

● 54MM (0.6MM) COPPER HEAD GASKET(ZOOMER-X / SCOOPY-i / DIO 110 / VISION 11

HOYAKI

54MM HOYAKI DOME RACING PISTON (13MM PIN)

● 54MM HOYAKI DOME RACING PISTON ● High quality 54mm light weight dome r

YUMINASHI

56MM (0.6MM) COPPER HEAD GASKET(ZOOMER-X / SCOOPY-i / DIO 110 / VISION 110 / MOOVE)

● 56MM (0.6MM) COPPER HEAD GASKET(ZOOMER-X / SCOOPY-i / DIO 110 / VISION 11

HOYAKI

56MM HOYAKI DOME RACING PISTON (13MM PIN)

● 56MM HOYAKI DOME RACING PISTON ● High quality 56mm light weight dome r