Currency Displayed in
Below are the available bulk discount rates for each individual item when you purchase a certain amount
● B-TYPE TO A-TYPE INJECTOR LOOM
● Plug & Play B-type to A-type injector wire loom to connect the older A-type injector type on a bike mentioned to have a B-type injector which is normally build from 2013 until today.
A-type injectors are available with a higher flow rate, so if you need an injector with a higher flow rate as we have available in the B-type injector range, then this could be a reason to change and install the A-type injector.
※ Keep in mind that if you want to install the wider diameter A-type injector on a injector joint mentioned for a smaller type B-type injector, then you need to machine the inner diameter of your plastic injector joint between 10.7mm and 11mm where 10.7mm is perfect and 11mm is an acceptable tolerance.
※ The A-type injector is also taller compared to the B-type injector, so you will also need to install some washers between the manifold and the injector joint to lift up the injector joint.
※ All complete Yuminashi cylinder kits before 2018 where shipped out with the 175cc/min flow rate A-type injector, A-type manifold and injector joint to be used with the B-type to A-type injector loom.
SMART SHOPPER TIP:
※ BUYING MORE THAN 1 PIECE CUT THE TRANSPORT PRICE, AND YOU RECEIVE A 10% DISCOUNT ON TOP OF IT!
※ B2B:
All prices are in AUD