Currency Displayed in
Below are the available bulk discount rates for each individual item when you purchase a certain amount
This specific set with the STD150 Head is mentioned for the First Generation PCX125 bikes.
The entire set comes with all parts necessary to be installed on the first generation PCX125 like:
The STD 150 Head comes without the camshaft and rockers, with double reinforced valve springs and special retainers installed. First generation rockers can be installed in this 150 head.
● The head is plug and play ready to accept both, the first generation PCX125 camshaft and rockers, and the new eSP roller rockers with camshaft (optional).
※ Keep in mind that a 2012 and onward exhaust must be installed on this eSP cylinder head, this eSP cylinder head can not be used with a first generation PCX125 exhaust.
The screw thread of the water temperature sensor in the 150 STD Head is M10x1.25 (PCX125 first generation water temp sensor is M12x1.50).
If you want to install the PCX125 first generation water temperature sensor in the 150 STD head, then you need to pre-drill with a 10.5mm drill bit, and tap the threads with an M12x1.50 tap.
※ The cylinder head nuts neet to be tightened at 27Nm (2.8kgF-M)
SMART SHOPPER TIP:
※ BUYING MORE THAN 1 PIECE CUT THE TRANSPORT PRICE, AND YOU RECEIVE A 10% DISCOUNT ON TOP OF IT!
※ B2B:
All prices are in XPF