Currency Displayed in
Below are the available bulk discount rates for each individual item when you purchase a certain amount
● YUMINASHI STRAIGHT (2PCS) FUEL HOSE CONNECTOR SET (FOR 6.3MM O.D. INJECTOR JOINT) (17530-630-800S)
● If you want to run high RPM's, then you need the fuel volume to do so, and for this we have 3 different sets of Fuel Hose Connectors, and 3 different diameter Reinforced High Pressure Fuel Hoses to provide you a very solid custom solution as engine tuner to work the fuel supply optimalisation out based on your needs.
● The Straight Fuel Hose Connector set 17530-630-800S we show you on this page will provide you the fastest flow with the least chance on a pressure drop, since the flow is pushed straight out of the fuel pump and straight into the injector.
● The 3 different Fuel Hose Connectors we have are available are;
※ Keep in mind that this fuel hose connector is mentioned to be connected on a injector joint with a outer diameter of 6.3 to 6.4mm (check your injector joint outer diameter before you order!).
※ If you install our 6.3mm fuel hose connectors on the 5mm hose, then it can be done, but keep in mind that it will be a tight fit, and you will need to use the 13mm clamps then because the hose outer diameter will expand.
● FUEL HOSES (OPTIONAL!, DOESN'T COME WITH THE FUEL HOSE CONNECTOR SET)
● The 3 different Inner Diameters fuel hoses we have available are:
● Buying the connectors and hose lengths based on your needs allows you also to be creative, and to work something out such as a double injector setup for your bike, example; if you need a 180cc/minute injector (which are hard to get), then you could use 2 injectors of 90cc/minute, or any other combination to work a solution out based on the Air Fuel Ratio you have in mind.
● Our Reinforced High Pressure Fuel Hoses allow you to run your engine with an E5 or E85 Ethanol / Gasohol fuel blend, and to install basically any high pressure fuel pump you have in mind, these fuel hoses are absolutely racing track ready and they won't let you down, whatever your tuning project might be!...
※ We recommend to keep your hose length as short as possible, and to avoid bends in your hose because every bend is squeezing the inner diameter of your hose together, and with a narrow inner diameter it isn't possible to run high RPM's!...
● TECHNICAL DETAILS / SPECIFICATIONS OF THE STRAIGHT FUEL HOSE CONNECTORS:
SMART SHOPPER TIP:
※ BUYING MORE THAN 1 PIECE CUT THE TRANSPORT PRICE, AND YOU RECEIVE A 10% DISCOUNT ON TOP OF IT!
※ B2B:
All prices are in THB