Currency Displayed in
Below are the available bulk discount rates for each individual item when you purchase a certain amount
● 32MM YUMINASHI THROTTLE BODY UPGRADE SET (ADV160 | 4V PCX125/160 | SH125i/160) (16410-K0R-V32)
● This 32mm throttle body set is a custom throttle body with a 32mm inner diameter, and a larger than stock outer diameter at the air filter side (45mm), with a stack machined into the air intake to create an improved venturi/air flow effect.
● The "venturi" refers to the section where we narrow the air intake, creating a constriction. This narrowing from wide to smaller causes the air to accelerate due to the venturi effect, increasing its velocity. This increased velocity can improve airflow and potentially enhance engine performance.
● By increasing the air velocity, it's helping to draw more air into the engine and increased power, especially at higher engine speeds, with improved throttle response and fuel efficiency.
● The 32mm throttle body is a very good and safe choice to be used in combination with a 22/19mm valves cylinder head, such as the YUMINASHI GT220 Head.
※ This throttle body with the larger diameter at the air filter side can not be installed on the stock air intake hose, recommend to replace the stock intake hose by the stainless steel air intake upgrade on the air filter box, or to use a custom foam air filter.
※ This throttle body need to be installed with a 32mm manifold, and a 32mm manifold top plate (LINK).
● YOU CAN CHECK THIS VIDEO, TO SEE HOW TO SWAP THE SENSORS FROM YOUR STOCK THROTTLE BODY ONTO THE 32MM THROTTLE BODY (Time Stamp 22:28):
SMART SHOPPER TIP:
※ BUYING MORE THAN 1 PIECE CUT THE TRANSPORT PRICE, AND YOU RECEIVE A 10% DISCOUNT ON TOP OF IT!
※ B2B:
All prices are in EUR